The Analog Hotline feature configures an analog telephone connected to an Analog Telephone Adaptor (ATA) to automatically call a pre-configured telephone number when taken off-hook. When configured, the telephone only makes calls to one number and cannot be used to call any other number.
• ATA IP endpoints supported are the Cisco SPA122, the Cisco SPA2102, the Cisco SPA8000, the Audiocodes MP-1xx series ATAs, and the Audiocodes MP-124 ATA.
• The Analog Hotline feature user assignment should not be allowed for the following station types: Loudspeaker Station, Messaging Station, or Trunk Station
• Inbound calls to the Analog Hotline feature are not restricted nor are the normal user features for inbound calls such as Call Forwarding, Sim Ring, etc.
All that is required to enact the Hotline feature is to take the phone receiver off hook. A call will be placed to the pre-configured number and once it is answered the call will be connected.
Step 1. Log in to My Site
Step 2. Select the appropriate Site to configure
Step 3. Go to User Features
Step 4. Select Analog Hotline
Step 5. Configure Settings